BMW Motorrad K 1600 B Grand America, Rider'S Manual

Page: 161 / 304

Slacken retaining screws 1 .
Push the two mounting pins 2
apart until the front forks fit
between them.
Use locating pins
3 to set the
front-wheel stand to the de-
sired height.
Centre the front wheel stand
relative to the front wheel and
push it into position at the front
axle.
ATTENTION
Excessive movement of the
left-hand mounting bolt
Damaged sensor ring of the
BMW Motorrad Integral ABS
Only slide the left-hand mount-
ing bolt towards the inside so
that it does not come into con-
tact with the sensor ring.
Push both mounting pins
2
through the triangles of the
brake caliper anchorages just
far enough to allow the front
wheel to be rolled between
them.
Tighten retaining screws 1 .
ATTENTION
Centre stand lifts clear if the
motorcycle is lifted too high
Risk of damage to parts if vehicle
topples
When lifting, make sure that
the centre stand remains in
contact with the ground.
Apply uniform pressure to push
the front-wheel stand down
and raise the motorcycle.
9
159
z Maintenance