BMW Motorrad G 650 GS 2007, Rider'S Manual

Page: 87 / 143

Pull the defective fuse up and
out of the fuse box.
If fuse defects recur fre-
quently have the electric
circuits checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Installing fuse
Remove the defective fuse and
replace it with a fuse of the
correct amperage rating.
The fuse assignments and
fuse amperage ratings spe-
cified for your motorcycle are lis-
ted in the section entitled "Tech-
nical data".
Close the fuse cover.
The latch engages with an
audible click.
Install the seat (
40).
Bulbs
Notes
A defective bulb places
your safety at risk because
it is easier for other users to
oversee the motorcycle.
Replace defective bulbs as
soon as possible; always carry a
complete set of spare bulbs if
possible.
The bulb is pressurised and
can cause injury if dam-
aged.
Wear protective goggles and
gloves when changing bulbs.
The types of bulb fitted to
your motorcycle are listed
in the section entitled "Technical
data".
Do not touch the glass of
new bulbs with your fingers.
Use a clean, dry cloth to hold
the bulbs when handling them.
Dirt deposits, in particular oil and
grease, interfere with heat radi-
ation from the bulb. This leads
to overheating and shortens the
bulb's operating life.
Replacing low-beam and
high-beam headlight bulb
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Always make sure that the
motorcycle is stable and firmly
supported.
8
85
z Maintenance
ProCarManuals.com