BMW Motorrad Fit-for-All, Operating Instructions Manual, Page: 43 / 48

the equipment on and off, the user is
encouraged to try to correct the interference
by one or more of the following measures:
● Reorient or relocate the receiving antennae
●
Increase the separation between the
equipment and the receiver
●
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
● Consult the dealer or an experienced
radio/TV technician for help.
FCC RF Exposure Statement
This product is compliance to FCC RF
Exposure requirements and refers to FCC
website
https://apps.fcc.gov/oetcf/eas/reports/Generic
Search.cfm search for FCC ID: S7A-SP08-A
FCC Caution
Any changes or modifications to the
equipment not expressly approved by the
party responsible for compliance could void
user’s authority to operate the equipment.
IC: 8154A-SP08
Industry Canada Statement
This radio transmitter (identify the device by
certification number) has been approved by
Industry Canada to operate with the antenna
types listed below with the maximum permissible
gain indicated. Antenna types not included in this
list, having a gain greater than the maximum gain
indicated for that type, are strictly prohibited for
use with this device.
This device complies with Industry Canada
license-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference,
including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR
d’Industrie Canada applicables auxappareils radio
exempts de licence. L'exploitation est autorisée
aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur
de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est