16
The system can run on battery power for up to
four hours, depending on the imaging mode and
the display brightness. When running on battery
power, the system may not restart if the battery is
low. To continue, connect the system to AC
power.
1)Charging through direct with battery
1. Take out the battery from the main unit or take out the spare battery.
2. Connect the round end of the adaptive line to the "
" terminal of the adapter, and the
flat end to the charging terminal of the battery.
3. Connect power cord of "
" of the adapter to the AC EPS.
4. When the "
" indicator light on the adapter turns into red, the battery is in charging;
when the "
" indicator light turns into green, the battery is fully charged.
2)Charging through main unit
Direct contact with the FarmScan® L60 main unit.
3)Charging through auto-charger
1. Take out the battery from the main unit or take out the spare battery.
2. Connect the flat end marked with an arrow of the auto-charger to the charging terminal of the
battery.
3. Plug the other end of the auto-charger into the cigar lighter socket.
4. When the "Charging" indicator light on the adapter turns into red, the battery is in charging;
when the "Charging" indicator light turns into green, the battery is fully charged.
Tips:
1. The input voltage of the auto-charger is DC9～14V/1.5A.
2. The output voltage of the auto-charger is DC12.6V/1A.
3. The operations and storage environment are the same as those of the main unit.
Note
