Operating Instructions USER
’
S MANUAL
32
lever before riding. To check the brake,
check the position of the adjustable nut
if the nut position reach to the end,
have a dealer to replace the brake shoes
as a set.
BRAKE FLUID
Insufficient brake fluid may allow air
to enter the brake system, possibly
causing it to become ineffective.
Be fore riding, check that the brake
flu id is above the minimum level
mark (1) and refill it if necessary.
•
Low position brake fluid level may
indicate worn brake pads and/or brake
system leakage.
•
If the brake fluid level is low, be sure
to check the brake pads for wear
and the brake system for leakage.
•
When checking the fluid level, make
sure that the top of the master cylinder is
level by turning the handlebars.
•
Use only the recommended quality brake
fluid, otherwise the rubber seals may
deteriorate, causing leakage and poor
braking performance.
•
Refill with the same type of brake
fluid. Mixing fluids may result in a
harmful chemical reaction and lead
to poor braking performance.
•
Be careful that water does not enter
the master cylinder when refilling. Water
will significantly lower the boiling point
of the fluid and may result in vapor lock.
•
Brake fluid may deteriorate painted
surfaces or plastic parts. Always clean up
spilled fluid immediately.
•
As the brake pads wear, it is normal
for the brake fluid level to gradually
go down. However, if the brake fluid
level goes down suddenly, have a
dealer check.
Changing the brake fluid
Have a dealer change the brake fluid
at the intervals specified in the NOTE
after the periodic maintenance and
lubrication chart.
