BMR SFU 0303, Manual

Page: 18 / 62

18
SFU 0303 Frequenzumrichter
6.6 I/O Interface - Digital and Analog In- and Outputs
19"Version and Desktop:
(D-Sub 25pin female)
The Default-settings of the functions for the outputs can be set up freely with the help of the PC-
Software SFU-Terminal.
An exception is the signal "Power Stage Pulse Lock", which is linked fix with Relay 6. According to the
switch state it will be output 0V / GND or +24V via 10k
Ω referring to GND (7, 19) (-> 8.2 / 8.7)
+24V: Power Stage released 0V: Power Stage locked.
✓
The digital outputs (Relay1...5) are galvanically separated (500V
Isolation
).
DC: 24V / 1000mA AC: 125V / 500mA
✓
Switch level digital inputs: 0..7V = "0" / 18..24V = "1"
✓
Analogue input range 0…10V
✓
Output level Speed / Hall Sensor: 0-24V (24V Level)
✓
+24V at Pin6, 18 may be used as auxiliary power supply for e.g. an electronic spindle interface
Pin Description Direction Function / Massage / default Setting
1,14 Relay Common Common Rail for Relay contacts
2 Relay 1 Normally Closed Output
15 Relay 2 Normally Closed Output
3 Relay 3 Normally Closed Output
16 Relay 4 Normally Closed Output
4 Relay 5 Normally Closed Output
17 Relay 6 Normally Closed Output Feedback signal for Power Stage Pulse Lock state no function with STO
5 Relay 1 Normally Open Output
6,18 +24V/50mA Output Auxiliary voltage for active field plates
7,19 GND
20 Relay 2 Normally Open Output
8 Hall Sensor Output
Modified signal from speed sensor
21 Digital In 2 Input Power Stage Pulse Lock
9 Digital In 6 Input
22 Digital In 5 Input
10 Digital In 4 Input
23 Digital In 3 Input
11 Digital In 1 Input
24 Analog In 1 Input
12 Analog In 2 Input
25 Analog Out 1 Input
13 Analog Out 2 Input