BMR SFU 0303/4, Manual

Page: 11 / 48

…when it comes to quality! BMR GmbH
9
6. Connections, Interfaces and Pinouts
For embedding into PLC and controls the SFU0303 has several input and outputs.
They are realized as pluggable screw terminals and are located at the front or rear panel
(depending on case option). All contacts are separated galvanically from high voltage carrying
circuits.
Operational parameters and outputs:
The
SFU-0303
captures all current important operational parameters and operating data.
Up to 6 digital outputs can be used for signaling and up to 2 analogue values can be output to
the analogue outputs (0-10V).
Remote Control and Outputs:
6 digital inputs (24V) and 2 analogue inputs (0-10V) are available for remote control of the
SFU-0303 .
These assignments can be configured freely. By using the optional Windows PC software
"
SFU-Terminal"
the above mentioned assignments can be achieved easily, providing
exceptional flexibility with each application.
Each operating parameter can be assigned as a signal and each control signal can be assigned
to a certain I/O pin. In addition, the logic level (high or low active) can be individually defined.
The same assignment is also possible for the analogue measured data and control data at the
analogue I/O pin.
The standard allocations of operational parameters, their outputs, control signals and inputs,
are listed in the following tables.