19
T
T
E C H N I C A L
E C H N I C A L
S
S
P E C I F I C AT I O N S
P E C I F I C AT I O N S
Caring for your unit
If your unit is damaged, you should not use it but should return it to BMR or your local distributor for replacement or repair.
Repairs, service and modifications may not be carried out by anyone other than qualified service personnel authorized by
BMR.
Access to the interior of the unit is not required for maintenance purposes.
Important:
Under no circumstance should anything other than the correct type of batteries (rechargeable batteries 3.6V NiMH) be used
with your unit. These can be purchased from the BMR Careline.
Disposing of the gel pads and batteries
Used gel pads and batteries must never be disposed of in a fire but in accordance with your state’s laws governing the disposal
of such items.
Notes:
The signal gradually increases to a peak intensity level at the start of the contraction phase (i.e. ramp up) and gradually
decreases to nothing at the start of the relaxation phase (i.e. ramp down). When the symbol is flashing, the stimulus is
significantly reduced.
Accessories:
You can purchase all accessories at www.bmrbeauty.com. Under no circumstances should anything other than BMR accessories
be used with your BMR charger or BMR unit (Type 371). Any others may not be compatible with your unit and could degrade
the minimum safety levels.
Set of 24 gel pads Type 724
Battery Pack:
(3.6V, NiMH)
Battery Charger:
(2504-5500)
Charger complies to EN 60950, Input: nominal voltage 100-240V, frequency 50-60Hz, current 125mA. Do not use any other
chargers or any other power supplies.
Adaptor:
(UK/Irl - 2504-5501) -
Adaptor:
(US/Japan - 2504-5502) -
Adaptor:
(EU - 2504-5503)
Product Type:
371
Intended Use:
TENS stimulator
Waveform:
Symmetrical bi-phasic square waveform when measured into a resistive load.
Classification:
Internally powered equipment, Class II charger, Type BF applied parts.
Environmental Specifications:
Operating Range:
Temperature: 0 - 35°C (32 - 95°F)
Humidity: 20 - 65 % RH
Storage Range:
Temperature: 0 - 35°C (32 - 95°F)
Humidity: 20 - 85 % RH
Attention:
This unit can deliver currents in excess of 2mA/cm
2
if used with incorrect gel pads.
