Caring for your
ACTIVATOR
Your
ACTIVATOR
should not be allowed to get wet or be left in excessive sunlight. It
may be cleaned regularly using a soft cloth, lightly dampened in soapy water. Do
not allow the interior of your
ACTIVATOR
to become wet. Do not use detergents,
alcohol, spray aerosols or strong solvents on your
ACTIVATOR
.
Access to the interior of the
ACTIVATOR
is not required for maintenance purposes.
If your
ACTIVATOR
is damaged, you should not use it but should return it to
BMR
or
your local distributor for replacement or repair. Repairs, service and modifications
may not be carried out by anyone other than qualified service personnel authorised
by
BMR
.
IMPORTANT
:
Under no circumstance should anything other than the correct type of
batteries – (rechargeable battery pack, 3.6V NiMH) be used with your
ACTIVATOR
.
These can be purchased from the Careline.
Disposing of the batteries
Used batteries must never be disposed of in a fire but in accordance with state or
national laws governing the disposal of such items.
NOTE
:
The signal gradually increases to a peak intensity level at the start of the
contraction phase (i.e. ramp up) and gradually decreases to nothing at the start
of the relaxation phase (i.e. ramp down). When the symbol is flashing, the
stimulus is significantly reduced.
Product t ype:
390
Classification:
Internally powered equipment, Class II charger, Type BF applied parts.
Intended use:
Muscle stimulator
Waveform:
Symmetrical bi-phasic square waveform when measured into a
resistive load.
technical specifications
11
10
Beauty Series Accessories:
You can purchase all accessories at www.bmrbeautyseries.com. Under no
circumstances should anything other than
BMR LIFT
accessories be used with your
ACTIVATOR FOR LIFT
(Type 390) or charger. Any others may not be compatible with
the product and could degrade the minimum safety levels.
BMR TUMMY LIFT
Garment (E:70)
BMR TUMMY LIFT
GelPads:
•1 large GelPad (Type 706 or 709)
•2 small GelPads (Type 707 or 710)
BMR BOTTOM LIFT
Garment (E:30)
BMR BOTTOM LIFT
GelPads:
•4 large GelPads (Type 716)
BMR ARM LIFT
Garments (E:60)
BMR ARM LIFT
GelPads:
•4 small GelPads (Type 715)
Belt Extender
Battery pack
(3.6V, NiMH)
Battery Charger (EU - 2504-0303)
Battery Charger (US/Japan - 2504-0302)
Charger complies to EN 60950, Input: nominal voltage 100-240V, frequency 50-60Hz,
current 125mA. Do not use any other chargers or any other power supplies.
Environmental Specifications:
Operating:
Temperature Range: 0 - 35°C (32 - 95°F)
Humidity:
20 - 65 % RH
Storage:
Temperature Range: 0 - 35°C (32 - 95°F)
Humidity:
20 - 85 % RH
Description of your
ACTIVATOR
’s symbols:
There are a number of technical markings on your
ACTIVATOR
. These can be explained
as follows:
The
ACTIVATOR
and garments are manufactured for Bio-Medical Research Ltd,
Parkmore Business Park West, Galway, Ireland.
The
ACTIVATOR
requires 1 x 3.6 volt (NiMH) DC battery pack. DC is indicated by
the symbol:
English
BMR Activator IM_Layout 1 21/03/2011 10:59 Page 12
