manualshive.com logo in svg

BMPRO THOR RVMASTER, Owner'S Manual

Share
Download
BMPRO THOR RVMASTER Owner'S Manual Download Page 33

33

SOLAR CONTROLLER

When solar is connected to a compatible RVC controller, the Solar Controller 
screen allows you to view the status of any connected solar panels.

FIGURE 27: 

Solar Controller Screen

Solar Controller 

This section displays the input voltage and current from the solar panel and the 
output voltage and current of the battery.

Solar Temperature

This section displays the solar controller regulator and battery temperature.
If no battery sensor is present, the battery temperature can be hidden from view.
The temperature can be displayed in either °F or °C, depending on what 
preference has been set in the App’s General Settings.

Solar History

This section displays the total electric charge produced in ampere hours for today, 
yesterday, and two days ago, and the total charge produced over the last seven 
days.
Electric charge is displayed in ampere hours.
The total power generation is displayed in kilowatt-hours.

Clear History

The Clear History button will clear all the solar history, including the total power 
generation and total operating days.

Summary of Contents for THOR RVMASTER





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands