BMPRO THOR RVMASTER, Owner'S Manual

Page: 31 / 52

31
If the Generator Status (applies only to gas generators, and not to diesel
generators) indicates a fault:
1.
Press the Start Generator button.
2.
Fix the fault with the generator.
3.
Press the Stop Generator button.
If the fault has been fixed, when you next turn the generator on from the RVMaster
App, the Generator Status will display “No fault”.
Figure 25: Auto Generator Start
When enabled, Auto Generator Start (AGS) will monitor battery and/or climate
levels and automatically turn the generator on and off to support these functions.
To use AGS, press the
Auto Generator (AGS) button, then swipe to turn on AGS.
If AGS is enabled and conditions determine that the generator should start to
support battery and climate functions, the Node will automatically attempt to
start the generator a total of four times. After four failed starts, the Node will no
longer attempt to start the generator.
Please consult your generator’s owner’s manual if AGS fails because the
generator could not be started.
To use AGS from your Controller, you may need to update the RVMaster App on the
Controller.
Auto Generator Start (AGS)