CONTROLLING LOADS WITH THE JHUB APP
Controlling the caravan’s load from the JHub App is as simple as a push of a button.
A tan icon indicates that the load is on, grey - the load is off and blue - the load is unable to
be used. The following examples describe situations in which a load is unable to be used.
Low Battery Voltage
If the caravan’s battery voltage drops to low levels, the J35 will automatically enter
Sleep Mode, stopping power to all caravan loads connected to the J35 load terminal
block and disabling load control from the JHub App. You will still be able to monitor
the battery capacity and consumption with the JHub App.
If the caravan’s battery voltage continues to drop, the J35 will then enter Storage Mode
and the ControlNode will no longer receive power through the communication bus.
The ControlNode will disconnect Bluetooth communication to the JHub Tablet.
Monitoring of battery capacity and consumption with the JHub App will no longer be
available. This is to conserve remaining available battery power until the battery can
be charged.
User Enabled Sleep Mode
Control of caravan loads from the JHub App will be unavailable if you press the Battery
icon and enable Sleep Mode. To regain control of the caravan loads, disable Sleep Mode.
User Enabled Storage Mode
Control of caravan loads from the JHub App will be unavailable if you activate the Load
Isolation Switch connected to the J35 to enter Storage Mode. To regain control of the
caravan loads, switch the Load Isolation Switch off (refer to J35 manual).
Note:
Load isolation switch is used to enter Storage Mode and power off all outputs
(load terminal block and CAN bus) except for the Air Suspension output on the J35 and
BatteryPlus35 units.
Slide-In/Out Control
The caravan’s slide-out mechanism will be engaged while the appropriate button is
pressed; release the button to stop the movement.
As a safety precaution, if the J35 is connected and receiving power from the AUX source,
you will not be able to operate Slide-In/Out Control from the JHub App.
The same applies even if the J35 is also receiving power from other sources (mains/solar).
This safety feature prevents the caravan’s slide-out mechanism from operating while
you are driving on the road. Operation of the Slide-In/Out Control from the JHub App will
become available when the towing vehicle no longer provides power to the Aux input.
14
Summary of Contents for JHub
Page 1: ...TEAMBMPRO COM OWNER S MANUAL JHubTABLET ...
Page 31: ...31 ...