Off
Navigate to OF, then press EXT to turn
power OFF to all appliances.
The OF function will not shutdown
generators connected to the NODE.
Navigate to the OF function, then
press EXT to confirm that power to all
accessories should be turned off.
Note: The CONTROLLER will turn off
after 10 seconds. The CONTROLLER can
be turned back on by pressing any of the
Light
buttons on the Control Panel.
Pairing
To pair the NODE with the
CONTROLLER, your own smartphone,
or to clear the NODE of any pairings.
For more information, see
Pairing to
the NODE
and
Clearing the NODE
.
Awnings
Navigate to the desired awning:
A1 (Awning 1)
A2 (Awning 2),
then press EXT or RET to operate.
Jacks
Navigate to the desired Jack:
J1 (Landing Jack)
J2 (Front Stabilizing Jack)
J3 (Rear Stabilizing Jack)
then press EXT or RET to operate.
Slide-outs
Navigate to the desired slide-out:
S1 (Slide-out 1)
S2 (Slide-out 2)
S3 (Slide-out 3)
S4 (Slide-out 4)
S5 (Slide-out 5)
S6 (Slide-out 6)
then press EXT or RET to operate.
Ramp Door
Navigate to the desired ramp door, then
press EXT or RET to operate.
CONTROL PANEL MENU FUNCTIONS
The menu functions on the Control Panel allow you to operate various motors,
quickly switch off loads and pair or clear the NODE. The following functions
apply depending on what is available in your RV.
13
