manualshive.com logo in svg

BMPRO J35A, Owner'S Manual, Page: 10 / 28

Share
Download
BMPRO J35A Owner'S Manual Download Page 10

10

Not all DC-DC chargers in the market used to boost auxiliary charging voltage from the 

towing vehicle are compatible with the J35.

o

 BATTERY FUSE

40A automotive battery fuse.

a

 SOLAR INPUT (J35B /J35C / J35D)

The J35B supports the use of panels up to a total of 300W and the J35C & J35D, 
450W. Input current to the solar regulator is limited to 20A (J35B, equivalent to 
2x150W solar panels) or 27A (J35C & J35D, equivalent to 3x150W solar panels).
The solar input is unable to operate in Power Supply Mode, i.e. with no caravan 
battery connected.

s

 AUXILIARY (AUX) INPUT

AUX input is designed for use with 12V DC power sources. The voltage of the DC 
power source connected to the AUX input must not exceed 14.8V. 
AUX will be available to charge the battery if the AUX voltage exceeds the battery 
voltage by at least 0.5V.

d

 LOAD ISOLATION SWITCH

To connect the caravan’s load isolation switch. This switch is used to enter Storage 
Mode and power off all outputs (load terminal block and CAN bus) on the J35, 
except for the Air Suspension output.
Battery charging is not affected by use of the load isolation switch.
As the caravan loads are no longer powered, activating the load isolation switch to 
enter Storage Mode is a convenient way to save remaining power of your battery if 
you are on the road and have limited ability to charge the battery. When charging, 
Storage Mode ensures that all available charging current is dedicated to charging 
your battery.

f

 CAN BUS COMMUNICATION

To connect to and power BMPRO accessories (BC300 + CommLink or 
ControlNode102)

Summary of Contents for J35A





























Reviews:

No comments