9
SPECIAL FEATURES
Overheating protection
If the
BatteryCharge7.5
becomes overheated during charging, the power output is
automatically reduced. This protects against damaging both your battery and the
charger.
Trickle charging
Once the battery has been fully charged, the
BatteryCharge7.5
automatically
changes to trickle charging. Depending on the measured voltage, the charging is
interrupted or the battery is maintained in a fully charged condition with low voltage
currents.
Long press 3sec. the MODE selection button
at no battery connected status
after
doing so, the corresponding LCD display
lights up. If you do not activate another
process afterwards, the electronic system will automatically start the power supply
output process as adaptor function together with the LCD display the
output is 13.6V DC 5.0A.
MODE
SMPS
13.6V
