8
Battery Connection
To connect the
BatteryCharge7.5
to a battery, follow these instructions:
Attach the (+) quick-release clamp (red) to the (+) terminal of the battery.
Attach the (–) quick-release clamp (black) to the (–) terminal of the battery.
Connect the mains lead of the
BatteryCharge7.5
to an electrical power outlet socket.
Disconnection
Disconnect the
BatteryCharge7.5
from the mains power
Detach the (–) quick-release clamp (black) from the (–) terminal of the battery.
Detach the (+) quick-release clamp (red) from the (+) terminal of the battery.
Memory Function / Reset
After connection to mains power or reconnection to a battery, the
BatteryCharge7.5
automatically returns to the last charge mode run. However, if that mode is not
compatible with the connected battery, the
BatteryCharge7.5
automatically resets
and remains in STANDBY mode.
Select Charging Mode
Press the MODE button repeatedly until the appropriate charging mode is displayed.
Note:
One of the modes shows only the battery voltage, with no other icons shown.
This is called the Standby mode. In this mode the battery is NOT being charged.
Holding the Mode button pressed for three seconds allows additional modes to be
selected.If a battery is not connected, only “SMPS 13.6V” can be selected.If a battery
is connected, “Advanced AGM 12V”, “Lithium 12.8V”, and “Recover 12V” can be
selected.
Note:
The Lithium mode cannot be selected if the battery voltage is less than 11.6V
or greater than 13.8V
OPERATION
CAUTION
Before installing or re-connecting the BatteryCharge7.5
always ensure that the mains plug is disconnected from
the mains socket.
