8
Battery Connection
To connect the
BatteryCharge4
to a battery, follow these instructions:
Attach the (+) quick-release clamp (red) to the (+) terminal of the battery.
Attach the (–) quick-release clamp (black) to the (–) terminal of the battery.
Connect the mains lead of the
BatteryCharge4
to an electrical power outlet socket.
Disconnection
Disconnect the
BatteryCharge4
from the mains power
Detach the (–) quick-release clamp (black) from the (–) terminal of the battery.
Detach the (+) quick-release clamp (red) from the (+) terminal of the battery.
Memory Function / Reset
After connection to mains power or reconnection to a battery, the
BatteryCharge4
automatically returns to the last charge mode run. However, if that mode is not
compatible with the connected battery, the
BatteryCharge4
automatically resets and
remains in STANDBY mode.
Select Charging Mode
Press the MODE button repeatedly until the appropriate mode is displayed.
Note:
One of the modes shows only a voltage reading, with no other icons shown.
This is called the Standby mode. In this mode the battery is NOT being charged.
To select “Lithium 12.8V” mode or “Recover 12V” mode, hold the mode button down
for 3 seconds.
Note:
The Lithium mode cannot be selected if the battery voltage is less than 11.6V
or greater than 13.8V
OPERATION
CAUTION
Before installing or re-connecting the BatteryCharge4
always ensure that the mains plug is disconnected from
the mains socket.
“More information https://www.caravansplus.com.au"
