Hydrosplit M3 Manuale utente – User manual - v1.6.5_ITA_ENG
45
Confirm the selected parameter by holding the T2 button for more than 3 seconds, thus moving to the
next parameter.
14) The fourteenth parameter that has be configured is the primary address of the Wired M-Bus (M-Bus)
of the cooling data. Select the digit using the T2 button and change the single numbers with the T1 button.
Confirm the selected parameter by holding the T2 button for more than 3 seconds, thus moving to the
next parameter.
15) Finally to exit the menu and save the configured parameters, select the number [1] in the ESC panel
by using the button T1. On the contrary, select the number [0] to return to the first sublevel
Warning: before confirming the settings saving, make sure to properly set all parameters, in particular
the input pulse value of the flow sensor as it is no longer editable.
CONSULTING MENU
The consulting menu is divided in six levels by a numeric index, always shown in the left-upper part of the
display.
By pressing the T1 button it is possible to choose the desired level, and by pressing the T2 button it is
possible to consult the sublevels of the preset level.
Here below, it is shown the navigation map of the consulting menu.
LEVEL 1: CUMULATIVE VALUES
1.1 Accounted energy (Heating) – cumulative
value
1.2 Display test – All segments on
