PCI-BASEII
Seite 10
4.2.3
Connecting a Lamp
A transistor can be used to switch higher
loads. The selected transistor must comply
with the maximum switchable current.
The figure on the right shows an application
with a maximum current of 100mA.
5
Connection Cable ZUKA16
Via a flat ribbon cable, the optionally available connection cable ZUKA16 leads the channels provided
at two 20-way pin connectors each to a 37-pin D-Sub female connector
with bracket, which is mounted at a free PC slot.
With the ZUKA16, the channels provided by module slot M2 (see
chapter 2.2) and the digital lines of the PCI-BASEII (see chapter 3) can
be reached externally.
The line of the flat ribbon cable leading to pin 1 of the D-Sub37 is
colored.
