AMS-K
Page 3
3
Connections and pin assignments
The following figure shows a PCB of the AMS cassette.
The different types only vary by the female connector on the
front panel.
The input signal connected to the panel is internally available
at the 7-pole pin connector (P1) and is led to the amplifier via
the AMS backplane.
3.1
AMS-K-CO5
The 5-pole terminal connector of the standard cassette AMS-K-CO5 is hard-wired.
The pin assignment of the terminal connector (P4) and the internally connected 7-pole pin plug (P1) are
listed in the following table and figure:
5-pole terminal
conn. (P4)
Pin assignment
7-pole pin plug
(P1)
1 0EXC 4
2 +EXC 6
3 HI 5
4 LO 3
5 -EXC 2
- -SE 1
- +SE 7
To comfortably connect signals to the terminals, a package of eight 5-pole screw-type terminal blocks
(
ZU5ST
) are available.
3.2
AMS-K-BNC
The AMS-K-BNC cassette provided with a BNC female. In this case, only the connections
"HI" and "LO" are available for using 2-pole sensors.
3.3
AMS-K-BIN5
The connector of the AMS-K-BIN5 cassette is a 5-pole Binder socket of the 712 series.
1 - 0EXC
2 - +EXC
3 - HI
4 - LO
5 - -EXC
1 - -SE
2
-EXC
3
LO
4
0EXC
5
HI
6
+EXC
+SE
-
-
-
-
-
7 -
1
2
3
4
5
Figure 1
