BMC Polymate YH-1000C User Manual Download Page 31 | Manualshive

Page: 31 / 56

BMC Polymate YH-1000C User Manual Download Page 31

Polymate

®

YH-1000C Polysomnograph User Manual V3.1

27

CHAPTER 9: LIMITED WARRANTY

BMC MEDICAL CO., Ltd. warrants that the YH-1000C Polymate

®

Polysomnograph device shall

be free from defects of workmanship and materials and will perform in accordance with the

product specifications for a period of one (1) year for main unit and 90 days for all accessories

from the date of sale by BMC MEDICAL CO., Ltd. to the dealer. If the product fails to perform in

accordance with the product specifications, BMC MEDICAL CO., Ltd. will repair or replace, at its

option, the defective part. BMC MEDICAL CO., Ltd. will pay customary freight charges from BMC

MEDICAL CO., Ltd. to the dealer location only. This warranty does not cover damage caused by

accident, misuse, abuse, alteration and other defects not related to material or workmanship.

Damages owing to improper operations will ask for paying for the cost fee when servicing.

BMC MEDICAL CO., LTD. DISCLAIMS ALL LIABILITY FOR ECONOMIC LOSS, LOSS OF

PROFITS, OVERHEAD OR CONSEQUENTIAL DAMAGES WHICH MAY BE CLAIMED TO

ARISE FROM ANY SALE OR USE OF THIS PRODUCT. SOME STATES DO NOT ALLOW THE

EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE

ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

To exercise your rights under this warranty, contact your local, authorized dealers or:

MANUFACTURER:

EU AUTHORISED REPRESENTATIVE:

BMC MEDICAL CO., LTD.

Shanghai International Holding Corp. GmbH

5/F Main Building, No.19 Gucheng S
treet West, Shijingshan,

Beijing 100043, P.R.China

Tel: 86-10-51663880

Fax: 86-10-51663880 Ext. 810

Eiffestra

β

e 80,

20537 Hamburg

Germany

Tel:0049-40-2513175

Fax:0049-40-255726

«
...
29
30
31
32
33
...
»

Summary of Contents for Polymate YH-1000C

























































Reviews:

No comments