iVolve Full Face Mask User Manual V1.
3
10 / 16
En
g
lis
h
Cleaning the Mask at Home
Notes:
The mask and headgear can only be cleaned through hand
washing.
The headgear may be washed without removing the clips.
CAUTIONS
Do not use solutions containing bleach, chlorine, alcohol,
aromatics, moisturizers, antibacterial agents, or scented oils to
clean any part of the system or air tubing. These solutions may
cause damage and reduce the life of the product.
Exposing any part of the system or tubing to direct sunlight or
heat may cause deterioration.
If any visible deterioration of a component is apparent (cracking,
crazing, tears etc), the component should be discarded and
replaced.
Daily / After Each Use
To optimize the mask seal, facial oils should be removed from the
cushion before use.
Handwash the mask by gently rubbing in warm (30°C) water using
mild soap or diluted dishwashing detergent.
If the pick-off port cover requires cleaning, use a soft bristle brush.
Rinse all components well with drinking quality water and allow
them to air dry out of direct sunlight. Do not soak the mask.
Weekly
Handwash the headgear and all components in warm (approx.
30°C) and soapy water. Use pure soap. Rinse the components well
and allow them to air dry out of direct sunlight.
