F2 Full Face Mask User Manual V2.1
8
/
14
E
n
g
lis
h
Cleaning the Mask at Home
Notes:
The mask and headgear can only be cleaned through hand
washing.
The elbow, the swivel and the valve cannot be dissembled for
washing.
CAUTIONS
Do not use solutions containing bleach, chlorine, alcohol,
aromatics, moisturizers, antibacterial agents, or scented oils to
clean any part of the system or air tubing. These solutions may
cause damage and reduce the life of the product.
Exposing any part of the system or tubing to direct sunlight or
heat may cause deterioration.
If any visible deterioration of a component is apparent (cracking,
crazing, tears etc), the component should be discarded and
replaced.
Daily / After Each Use
Disassemble the mask components according to the
disassembly instructions.
Thoroughly clean the separated mask components (excluding
headgear), by gently rubbing in warm (approx. 30°C) water
using mild soap.
Use a soft bristle brush to clean the vent.
Rinse all components well with drinking quality water and allow
to air dry out of direct sunlight.
When all components are dry, reassemble according to the
reassembly instructions.
