18
HEATER INDICATOR LIGHTS
If a fault should occur with the heater the lights situated
at the right hand side of the heater will be illuminated
indicating the fault
•
Red Lockout indication
(1)
.
This will be illuminated if the heater has gone to
lockout due to the loss of flame sensing by the flame
probe situated in the burner assembly in order to reset
the heater the RESET Button
(2)
should be pressed (if
fitted with remote controls the remote reset button will
reset this switch).
•
Yellow overheat indication (3)
.
This will be illuminated if the heater has exceeded the
temperature set on the thermostat. The thermostat will
shut down the burner until the fan(s) have cooled the
chamber sufficiently and the burner will re light.
If the yellow light is flashing this means that the heater
has gone to overheat and the LIMIT thermostat has
operated and shut down the burner The heater will not
re light until the LIMIT
(4)
has been reset this can be
done by removing the plastic cap covering the reset
button and pushing the reset replace cap
The cause of the overheat should be investigated
RECEIPT OF PRODUCT AND TRANSPORT
Delivery & pre installation checks
The heater is supplied wrapped in heavy duty
protective polythene, mounted on a pallet. On receipt
of the heater, the following checks should be carried
out:
a) The model is as per order
b) That it is undamaged
c) That it is suitable for the gas supply and pressure
d) That it is suitable for the electrical supply
If any of these points are not satisfied then contact
should be made with the Manufacturer. In the case
of claims for damage this must be reported in
writing within 24Hrs of delivery, in order to comply
with insurance criteria
WARNING
The instruction manual is an integral part of the
equipment and so, after the packaging has been
removed, make sure that it has been collected and
stored safety.
When moving the heater ensure that the
equipment used is capable of lifting and
supporting the weight of the heater
When lifting by fork truck ensure that the
forks support the weight
