Bluworld WATER WONDERS CLASSIC QUARRY TRIPLE NOJOQUI FALLS, Installation Manual

Page: 9 / 10

635 W. Michigan Street Orlando, FL 32805 · 888-499-5433 http://shop.bluworldusa.com
Page 9 of 10
RF Wireless LED Remote Control with Finger Slide
(Auto Color Changing Functions)
1. Remote Control Technical Information

Power supply: AAA battery 3pcs required

Working voltage: DC 12V/24V

Output control: 3circuits (R/G/B)

Receiving range: up to 20 meters or 60 ft.
2. Button Functions

Key 1: on/off

Key 2: Color changing functions (15 functions)

Key 3: Switch from white to color

Key 4: Increate brightness/intensity of light or speed of color change
sequence

Key 5: Decrease/dim brightness/intensity of light or color change
sequence
3. How to use

Press Key 1 to turn on/off the lights.

Press Key 2 to activate color changing functions. Press again to go
to the next function, 15 total functions.

Press Key 3 once to activate the white light, changing brightness by
pressing Key 4/Key 5. Press Key 3 twice to activate color light
mode, changing brightness by pressing Key 4/Key 5 or changing
light color by touching the color ring.

Resume function. The previous setting will be resumed after
powering on again.

Clear function: Press Key 4 five times within 3 seconds when power
on again, the light will blink 6 times if successful.
1
Auto color changing 8 levels of brightness, adjust by pressing Key 4 or 5
2 Three colors Flash 8 levels of speed, adjust by pressing Key 4 or 5
3 Seven colors Flash
4 Three colors gradually change
5 Seven colors gradually change
6 Red color Flashes 8 levels of brightness, adjust by pressing Key 4 or 5
7 Blue color Flashes
8 Purple color Flashes
9 Green color Flashes 8 levels of brightness, adjust by pressing Key 4 or 5
10 Yellow color Flashes
11 Cyan color Flashes
12 White color Flashes
13 Red/Blue light Blink alternately 8 levels of brightness, adjust by pressing Key 4 or 5
14 Green/Blue light Blink alternately
15 Red/Green light Blink alternately
4. Caution: Do not touch or press the color ring while loading the batteries to protect the sensitiveness. Turn on the
LED Lights immediately after the batteries are loaded for the first time. Replace the batteries when you find the
remote is no longer sensitive.