05
contact
|
CUSTOM PRO MATRIX
USER MANUAL
Front Panel -
touch panel shown only for illustrative purposes
Panel Descriptions - 16x16 Chassis
Rear Panel
1
LCD display - shows the status of input / output
selection, EDID etc.
2
IR receiver window
3
Input / output selection buttons - select output
number first (up to 2 digits), followed by enter, then
input number
4
Up / Down / Left / Right selection buttons
5
Menu button -press to enter menu structure - see
page 15 for more details
6
Power button - press and hold for 2 seconds to power
off
7
Exit / Cancel button- return to last menu page / exit to
main display page
8
Enter / Confirm button
1
TCP/IP port - for control of the Matrix from PC or third
party control processor
2
RS-232 / serial connector - for control of the matrix (as
above)
3
Analogue L/R line level inputs (3.5mm stereo jack)
Audio can be embedded onto video outputs
4
RS-232 control card slots - insert optional RS-232
control cards for serial control at HDBaseT™ receivers
5
Audio output card slots - insert optional audio cards
for zone / output audio breakout
6
IR control card slots - IR control card for 2-way &
Global IR control (supplied within 16x16 chassis)
7
Mains power switch
8
Video input card slots 1-4 (inputs 1-16) - insert video
input cards to connect to source devices (input card
slot 1 mandatory; 2-4 optional)
9
Video output card slots 1-4 (outputs 1-16) - insert
video output cards (output card slot 1 mandatory; 2-4
optional)
q
Power port – use supplied IEC cable to power matrix
1
2
3
4
5
6
7
8
9
q
1
2
3
4
5
6
7
8