04
www.blustream.co.uk
|
www.blustream.com.au
CUSTOM PRO MATRIX
USER MANUAL
Rear Panel
Front Panel
Panel Descriptions - 8x8 Chassis
1
8 9
q w
e
2
3
4
5 6
7
1
TCP/IP port - for control of the matrix from PC or third
party control processor
2
RS-232 / serial connector - for control of the matrix (as
above)
3
Analogue L/R line level input (3.5mm stereo jack)
audio can be embedded onto video inputs
4
RS-232 control card slots - insert optional RS-232
control cards for serial control at HDBaseT™ receivers
5
Audio output card slot - insert optional audio card for
zone / output audio breakout
6
IR control card slot - insert optional IR control card for
2-way & Global IR control
7
Mains power switch
8
Video input card 1 (inputs 1-4) - insert video input
card to connect to source devices (mandatory)
9
Video input card 2 (inputs 5-8) - insert video input
card to connect to source devices (optional)
q
Video output card 1 (outputs 1-4) - insert video output
card (mandatory)
w
Video output card 2 (outputs 5-8) - insert video output
card (optional)
e
Power port – use supplied 24V 8A DC adaptor to
power matrix
1
LCD display - shows the status of input / output
selection, EDID etc.
2
IR receiver window
3
Input / output selection buttons - select output
number first followed by the input to be viewed
4
Up / Down / Left / Right selection buttons - for use
when navigating through matrix menu
5
Menu button - press to enter menu structure - see
page 15 for more details
6
Power button - press and hold for 2 seconds to power
off
7
Exit / Cancel button - return to last menu page / exit
to main display page
8
Enter / Confirm button
1
2
3 4
5
6
7
8