18
Fig. 18.2
Connection to the water cooler
This supply head must be connected to
an undercounter watercooler. Do not
connect this machine directly to the mains
water supply.
Connect the incoming water tubes of the
supply head (external diameter 8 mm) to
the water cooler, paying attention to the
labels of the pipes (Fig. 18.2).
Once the pipes are attached, open the
main water valve. Ensure there are no
leaks.
Before drinking the water from the
system, perform a thorough rinse of the
circuit by dispensing water from each
product line.
With the screw on the compensator
(1) you can adjust the exit flow of the
sparkling water. Turn the screw clockwise
to decrease the flow or counterclockwise
to increase it.
1
Fig. 18.1
CAUTION!
To connect the water cooler to the mains
water supply, you will need to use a new
set of connectors (joints, gaskets and
pipes).
Do not use a set of connectors that has
already been used elsewhere.
The water pressure entering the unit must
be between a minimum of 1,0 bar (0.10
MPa) and a maximum of 3,5 bar (0.35
MPa).
