background image

28

Replacement of the UV lamps

The replacement can only be performed 

by qualified personnel.

Disconnect the unit from its electrical source.

Once the unit is shut down, rotate and 
remove the nozzle. Then, remove the top 
cover unscrewing the two screws on the 
sides (1).

Disconnect the electrical connector of the 
UV OUT lamp (2). Pull the lamp (3) removing 
it from its fitting holder—handling it carefully.

Insert the new lamp and reconnect the 
connector — handling it carefully.

N.B. For the replacement of UV OUT pipe it’s 
not necessary to turn the water off.

Disposal of used UV OUT lamps

The UV lamps contain mercury amalgam. 
This allows the disposal of the lamps at a 
local waste management site. This way of 
disposing is completely identical to the 
disposal of neon lamps or energy-savings 
lamps. These lamps are nevertheless 
registered under the same conditions as the 
disinfection lamps.

CAUTION!

The light emitted by the ultra-violet lamp 

may cause serious burns to the eyes and 

skin.

Do not remove it from its stainless-steel 

container – only a qualified technician 

should do so.

Fig.28.1

1

Fig.28.2

2

3

Summary of Contents for BluSoda 30





































Reviews: