BATTERY INSTALLATION
1.
Turn the Printer over
2.
Remove the Battery Flap as shown in figure 1.1
3.
Place the Battery as shown in figure 1.2 and plug the connector
(there is only 1 way to plug the connector)
4.
Close the Battery Flap as shown in figure 1.1
5.
THERMAL PAPER INSTALLATION
Thermal Paper roll can print only on one side. To identify the
Thermal side, scratch the paper roll on both sides. The side which
turns black is the Thermal Side. Keep the paper in such a way that
thermal side of the roll is in contact with the printer head.
Push Flap Back In after battery installation
Pull the flap out
FIG 1.1
FIG 1.2