DR040_Quick_V1.0
3.3 Power Setup
This device should be operated only with the type of power source indicated on the manufacturer’s label. Connect
the indicated AC power cord to the power adapter, and plug into an electrical outlet. The power LED “
” will be on as
green. It takes approximately 10 to 15 seconds to boot the system.
3.4 Date and Time Setting
Before operating your DVR, please set the date and time on your DVR first.
Press the “MENU” button and enter the password to go to the menu list. The default admin password is 0000.
Move the cursor to “DATE” and you can set the date / time / daylight saving in the “DATE” menu list.
3.5 Password Setting
Press the “MENU” button and enter the password to go to the menu list. Then, move the cursor to “ADVANCE” to
enter the advanced setting menu.
In the “ADVANCE” menu, move the cursor to “SYSTEM”. Select “PASSWORD” and press the “ENTER” button to
enter the submenu to set the password (four digits). The default admin password is 0000.
ADVANCE
SYSTEM
CAMERA
PASSWORD
XXXX
DETECTION
RESET DEFAULT
RESET
DISPLAY
CLEAR HDD
HDD-MASTER-1
ALERT
UPGRADE
START
SYSTEM
AUTO KEYLOCK
NEVER
NETWORK
LANGUAGE
ENGLISH
BACKUP
VIDEO FORMAT
NTSC
HDD INFO
VERSION
1167-1012-1022-1017