14
indicator light. The letters ‘FC’ on the display screen will now disappear and you will no longer hear
the warning tone. The actual water temperature will be displayed. All buttons return to normal
working status.
Bubble button – On-off button for the bubble system. Press this button to start the
air pump. The red indicator light will light up. Press the button again to stop the
bubble system. The light will turn off. The bubble system will stop automatically after
20 minutes. Wait 10 minutes before restarting the bubble function.
When the bubble function has worked for 15 minutes or less, the bubbling can be
stopped and restarted at any time. After that, the bubbling can be stopped. You should not restart
bubbling immediately but instead wait 10 minutes before doing so.
Heater button – On-off button for the heating system. Press this button to start
the heating system. The red indicator light will light up. At the same time, the red
indicator light on the Filter button will also light up and the filter pump will start
working too. Press the button again to stop the heating system. The red indicator
light will turn off.
When the preset temperature has been reached, the heating system will stop working, while the
heating indicator light will stay on. The filter pump will keep working and the filtration indicator light
will stay on. When the water temperature drops 2 degrees below the set temperature, the heating
system will restart automatically and so will the filter pump. The filter indicator light will be on.
L
PLEASE NOTE:
You cannot use the bubble function and the heating function at the same time.
Temperature buttons – Buttons for setting the temperature. Set the temperature by
pressing the Temperature Increase or Temperature Decrease buttons. The numbers on
the display screen will start flashing. When the desired temperature has been reached,
the set temperature value will flash 6 times and the display will be updated. The default
temperature is 38 °C and the temperature can be adjusted between 20 °C and 40 °C.
Temperature Increase button
Temperature Decrease button
Simultaneously press the Heater button and the Filter button to switch between Fahrenheit and
Celsius.
Child Safety Lock. Simultaneously press the Temperature Increase button and the
Temperature Decrease button for 3 seconds to activate the child safety lock. Do the
same to switch if off again. Once the child safety lock is activated, all buttons on the
control panel will be locked and cannot be used.
EN
2021-10-12 OCG BluMill Spa Pool Ibiza Manual V01.indd 14
2021-10-12 OCG BluMill Spa Pool Ibiza Manual V01.indd 14
16-12-2021 10:06
16-12-2021 10:06