11
INSTALLATION INSTRUCTION
L
WARNING 1:
The floor has to be capable of supporting the expected load.
L
WARNING 2:
An adequate drainage system has to be provided to deal with overflow water.
L
IMPORTANT:
Because of the combined weight of the spa tub, water and users, it is extremely
important that the surface on which the spa tub is installed is smooth, flat, level and capable
of uniformly supporting this weight for the entire time the spa tub is installed. If the spa tub is
placed on a surface which does not meet these requirements, any damage caused by improper
support will void the warranty. It is the responsibility of the spa tub owner to ensure the
integrity of the site at all times.
a) Indoor installation:
Be aware of special requirements if you install the spa tub indoors.
1.
The floor must be able to withstand the capacity of the spa tub. The floor should be a non-slip,
level surface.
2.
Proper drainage is essential when the spa tub is installed indoors. If the spa tub is to be located
in a purpose-built room, it is recommended that a floor drain be installed.
3.
Humidity is a natural side effect of spa tub installation. The effects of airborne moisture on
exposed wood, paper, etc. in the proposed location should be determined. To minimize these
effects it is best to provide plenty of ventilation in the area in question. An architect can help
you determine whether more ventilation is needed.
L
NOTE:
Do not install the spa tub on carpet or other material that can be damaged by moisture.
b) Outdoor installation:
1.
No matter where you install the spa tub, it is important that there is a solid foundation. If you
are installing the spa tub outdoors, make sure there are no sharp objects that could damage it
and that the location is level so that the spa tub is stable and can be properly inflated.
2.
Water may spill out of the spa tub during filling, emptying or usage. The spa tub should be
installed near a ground drain.
3.
Do not leave the spa tub’s surface exposed to direct sunlight for long periods of time.
Assembly
1.
Unpack the spa tub. Fold open the spa tub and cover and make sure they are the right side up.
2.
Unpack the control box.
Figur
e 1
EN
2021-10-12 OCG BluMill Spa Pool Ibiza Manual V01.indd 11
2021-10-12 OCG BluMill Spa Pool Ibiza Manual V01.indd 11
16-12-2021 10:06
16-12-2021 10:06
