Blumfeldt 10035140, Manual

Page: 33 / 124

33
EN
Step 1
17
Line up holes on the bracket of wheel assembly (17) with the corresponding
holes on base, then insert two M8 x 16 mm bolts (DD) through holes. Hand
tighten with two M8 flange nuts (EE).
Secure three base stands to the base using preassembled six M5 x 14 mm
bolts, Ø5 washers and lock washers.
To improve stability, the preassembled water box of tank housing assembly
can be filled with sand (not included).
Step 2
15
14
Keep the burner with the igniter side up. Fix the burner assembly (15) to
table (14) using four M5x12 mm screws (FF)..
Fill sand