Blumfeldt 10035093, Manual

Page: 39 / 44

39
EN
Problem Cause / Condition Solution
Burner flame is low.
Note: Do not operate the
appliance below 5 °C
(40 °F).
Gas pressure is low. Replace gas cylinder.
Outdoor temperature
is higher than 5 °C
(40 °F) and tank is less
than 25 % full.
Replace gas cylinder
Supply hose is bent or
kinked . Straighten hose and
perform leak test on
hose.
The control knob is in
“HIGH“ position. Turn control knob to
“OFF“, let it cool to
room temperature
and check burner and
orifices for blockage
Emitter glows uneven.
Note: Bottom 2.5 cm of
emitter normally does
not glow.
Gas pressure is low. Replace gas cylinder.
Base is not on a level
surface. Place the appliance on
a level surface
The appliance is not
level. Level the appliance.
Carbon build-up Dirt or film on reflector
and emitter.
Clean reflector and
emitter.
Thick black smoke Blockage in burner. Turn control knob to
“OFF“, let it cool to
room temperature,
remove blockage and
clean burner inside and
outside.