18
EN
OPERATION
Notes on Operation
• The heater must be properly installed before it is used.
• Only operate the heater when it is in the upright position.
• Although the patio heater is shower proof, do not use when raining or in
wet conditions.
• Always disconnect the power cable from the electrical supply, when the
patio heater is not in use.
On/Off Switch
• Press the On/Off switch to the “I“
position to activate the heater.
• To turn off the heater, press the On/Off
switch to the “O“ position.
Remote Control
• To operate the heater on 2000 W
power, press the left side button of
the remote control.
• To operate the LED light on, press
the right side button of the remote
control.
Touch Switch
•
Touch the touch switch once, turns the heater on 2000 W power.
• Touch the touch switch twice, turns the LED on.
•
Touch the touch switch three times, turns the heater on 2000 W power
and turns the LED on.
• Touch the touch switch four times, turns the heater and LED off.
CLEANING AND CARE
• Unplug the unit and let it cool completely.
• To keep the heater clean, the outer shell may be cleaned with a soft, damp
cloth. You may use a mild detergent if necessary. After cleaning, dry the
unit with a soft cloth..
• DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough
brushes to clean the heater. This may cause damage or deterioration to the
surface of the heater.
