Troubleshooting
Problem
Probable cause
Solution
Pilot will not light
Gas valve may be OFF
Tank fuel empty
Opening blocked
Air in supply system
Loose connections
Turn the gas valve ON
Refill LPG tank.
Clean or replace opening
Purge air from lines
Check all fittings.
Pilot will not stay
on
Debris around pilot
Loose connections
Thermocouple bad
Gas leak in line
Lack of fuel pressure
Clean dirty area
Tighten connections
Replace thermocouple
Check connections
Tank near empty. Refill LPG tank.
Burner will not
light
Pressure is low
Opening blocked
Control not ON
Thermocouple bad
Pilot light assembly bent
Not in correct location
Tank near empty. Refill LPG tank.
Remove and clean
Turn valve to ON
Replace thermocouple
Place pilot properly
Position properly and retry
If the appliance is in case of any defaults or problems of assembly or use, please don’t try
to modify it by yourself contact your supplier or distributor to solve it.
26
