
Dimensions in millimeters (inch equivalents as noted)
© 2015 Blum, Inc.
7
SERVO-DRIVE
TANDEM plus BLUMOTION Adjustments
Tilt adjustment
Rotate the tilt adjustment lever on the rear of each runner to tilt the
top of the drawer front forward
Maximum 5 (3/16") rise of drawer back (tool-free)
New depth adjustable locking device
Locking device
with side, height and depth
adjustment
Turning the adjustment screw
allows for up to 2.5 (3/32") out
adjustment
New depth adjustment on runner
TANDEM 563 and 569 runners
feature elongated holes that allow
± 4.5 (3/16") depth adjustment
New rear side adjustment
2
After front side adjustment is made with the locking devices,
rotate the rear side adjustment left or right to re-align the back
of the drawer box with the front. Drawer back moves in the same
direction as rotation.
Maximum 1.5 (1/16") to left or right (tool-free)
New side adjustment
1
Rotate side adjustment left or right equally on both locking devices.
Drawer front moves in the same direction as rotation.
with side adjustment
Maximum 1.5 (1/16") to left or right (tool-free)
NOTE:
Side adjustment not available on T51.x8xx locking devices
T51.1901.PS
T51.1901.xx
Height adjustment
1
Press up on adjustment tab
2
Push towards back of drawer
Maximum 3 (1/8") rise of drawer front (tool-free)
NOTE:
Height adjustment available on all TANDEM locking devices
0
0
R
L
R
L
drawer
front
L
R
L R
2
1
ST-CSDOC-68 Rev Feb 2015