22
BA-077/1EN M6X.20XX
3 - How to operate the machine
3.7.2) Setting the work table for horizontal drilling
• Loosen the clamping lever
(E10)
• Pull out work table completely
• Set revolving handle
(E11)
to position “H”
• Slide work top to the stop
• Retighten the clamping lever
(E10)
Note
Both control lights flash.
3.7.3) Setting the horizontal hold down clamp
(E21)
to the down position
• Press in locking mechanism
(E22)
• Use both hands to press down on the horizontal hold down clamp
(E21)
until it locks
in this position
Note
The control light for horizontal drilling must light up.
3.7.4) Setting hold down clamps
(E14)
to the material thickness
• Set hold down clamp
(E4)
to Pos. (loosen)
• Open clamping screw
(E15)
• Set the hold down clamps
(E14)
so that the distance between the door and the clamp
guard is a max. x = 3 mm
• Tighten clamping screw
(E15)
3.7.5) Opening the horizontal drilling unit cover
• Press in on the side cover and swivel back the cover hood.
!
!
