17
EN
With the additional slide [S2], edges and edge bands are milled from the rear.
When working with the additional slide, an additional work process is required:
Work process 1: Mill the workpiece at the rear using the additional slide [S2].
Work process 2: Cut through the workpiece with the front slide [S1].
This processing method completely avoids torn edges.
Milling with additional slide [S2]
(optional – part number:
M35.ZS0M01 SCHLITT)
■
The additional slide [S2] may not be included in the standard scope
of delivery, depending on the device type.
■
Part number: M35.ZS0M01 SCHLITT
NOTE
S2
S1
S2
Summary of Contents for M35.7200 Series
Page 47: ...47 EN Notes ...
