BLUM M35.7200.NA, Safety, Operating And Maintenance Instructions

Page: 14 / 48

14 BA-166
M35.7200.NA – Bottom router
D – Information about routing
Routing with depth stop [6]
for uncoated work pieces
The depth stop [6] is used to position the work piece.
For work pieces with edge bands and for backs, we recommend using
the wood stop [7].
equipment-grounding conductor. lf repair or replacement of the electric cord
or plug is necessary, do not connect the equipment-grounding conductor to a
live terminal. Check with a quahfied electrician or service personnel if the
grounding instructions are not completely understood, or if in doubt as to whether
the tool is properly grounded. Use only 3-wire extension cords that have 3-prong
grounding plugs and 3-pole receptacles that accept the tool's plug. Repair or
replace damaged or worn cord immediately.
■ This bottom router is intended for use on a circuit that has an outlet that looks
like the one illustrated. The bottom router has a grounding plug that looks like
the plug illustrated. Make sure the bottom is connected to an outlet having the
same configuration as the plug. No adapter is available or should be used with
this bottom router. lf the bottom router must be reconnected for use on a different
type of electric circuit, the reconnection should be made by qualified service
personnel: and after reconnection. the bottom router should comply with all local
codes and ordinances.
■ The outlet must be fitted with a PE protective contact.
■ The outlet must have a m inimum 16 A fuse.
■ After finishing work, disconnect the bottom router from the power supply.
■ Avoid overloading the outlet.
■ Do not use the bottom router together with an extension lead or cable drum.
■ Use a separately protected outlet for the dust extraction system and bottom router.
6