BLUM M35.7200.NA, Safety, Operating And Maintenance Instructions

Page: 13 / 48

13
NA
Connecting the power supply
Electrical connection
➢ Insert the plug.
The bottom router is designed for 230–240 V 50/60 Hz.
➢ Mount a plug conforming to CSA or UL requirements.
➢ Don't hardwire the bottom router directly to the supply circuit
NOTE
NOTE
■ In the event of a malfunction or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This tool is
equipped with an electric cord having an equipment-grounding conductor and
a grounding plug. The plug must be plugged into a matching outlet that is properly
installed and grounded in accordance with all local codes and ordinances. Do not
modify the plug provided - if it will not fit the outlet, have the proper
outlet installed by a qualified electrician. lmproper connection of the equipment-
grounding conductor can result in a risk of electric shock. The conductor with
insulation having an outer surface that is green with or without yellow stripes is the
■ The electrical connection must be performed by a qualified electrician!
■ The bottom router is designed for the voltage printed on the label of the
connection cable.
Connecting the dust extraction
system
➢ Insert an extraction hose with an inner diameter of 50 mm (2") into the
dust extraction socket [9] and secure it.
Dust extraction socket [9] outer diameter 50 mm (2").
➢ Ensure that the average air velocity for the dust extraction system
is at least 20 m/sec.
➢ The negative pressure must be 250–300 mbar.
➢ Move the carriage [S1] across the full length.
Check that the cable and hose can move freely.
Avoid tensioning or scraping the cable and hose.
9
S1
Grouding Pin