manualshive.com logo in svg

BLUM IF59-A2, Installation Instructions Manual, Page: 45 / 48

Share
Download
BLUM IF59-A2 Installation Instructions Manual Download Page 45

V3A | 08/2018

45

©

 

by Blum-Novotest

EC Declaration of Incorporation

9. EC Declaration of Incorporation

acc. to the EC Machine Regulations 2006/42/EC in the edition from 17 May.2006
We hereby confirm that the subsequently following components are defined for the in-
stallation into other machines and that they are in accordance with the following safety
requirements of the EC regulations.
Commissioning is not allowed until it is ascertained that the machines, in which the
components are installed, are in accordance with the EC regulations 2006/42/EC.
The relevant technical information is compiled acc. to annex VII part B and, where ap-
propriate, we will send the information concerning the components to the different
countries. The industrial property rights of Blum-Novotest GmbH will remain unaffect-
ed.

Component name

IF59-A2

Interface

Safety requirements

2006 / 42 / EC, Annex I

1.5.1

Applied standards:

EC-Regulations:

2014/30/EU

2014/35/EU

Applied harmonized standards:

EN 61000-6, EN 60204-1

EN ISO 12100

Applied national standards:

DIN VDE 0100

DIN VDE 0113

Authorised representative for technical infor-
mation:

Blum-Novotest GmbH
Kaufstr. 14
88287 Gruenkraut, Germany

Summary of Contents for IF59-A2

















































Reviews:

No comments