Switching Banks
Press and hold the
Mode/Store
switch (when lit) until it blinks. The
switch for the currently active bank will be lit, and the other 3 will blink.
Select another bank by pressing one of the blinking switches. The
Mode/
Store
switch will stop blinking and the new bank is active. 9 presets in
the now active bank can be accessed using switches
1
-
9
.
It was a deliberate decision to create a board with 9 presets and „only“
four banks. For one thing, it is still pretty easy to keep track of 9 presets
per bank, and most guitar players are quite well served with 9 sounds
in a live situation. And there are another 3 banks that can be loaded
with 9 more presets each. This way you can set up a bank that fits each
of your bands, your projects, in your living room, or just to experiment.
If you require more than 36 presets, you still have the option of making
the
AMP1
™
MIDI compatible with the help of the
BluGuitar
®
MIDI-
Adapter
(optional). Controlled by an external MIDI pedal, the MIDI
standard allows for
128 presets
.
Programming Sound Presets
To program specific sounds that you can later recall in
Preset-Mode
,
you first need to switch to
Direct-Access-Mode
. Press
Mode/Store
switch until it is no longer lit. Now you can create the sound you want
to program using the pedal functions and
Level-Controller
on the
REMOTE1
™
. To store the sound to a specific preset location, press and
hold the
Mode/Store
switch for 2 seconds, until switches
1
through
9
are blinking. Pressing one of the nine blinking switches will permanently
store your newly created sound to that location, and the switch will be lit.
Having stored your sound, the
REMOTE1
™
automatically switches back
to
Preset-Mode
, recognizable by the now lit
Mode/Store
switch.
To program a new preset, switch to the
Direct-Access-Mode
by press-
ing the
Mode/Store
switch again. Following the steps described above,
you can now create a new sound and store it to another preset.
Preset-Mode
offers the ability to combine all of the
REMOTE1
™
control and switching functions available in
Direct-Access-Mode
into
complete and individual sounds that can each be stored as one of 36 available presets. This lets you call up your own, signature sounds on
stage at the push of a button.
REMOTE1
™
offers you
4 banks
with
9 presets
each. Press the
Mode/Store
switch to access the
Preset-
Mode
. When the switch is lit,
Preset-Mode
is active. 9 different sounds can be stored in each of the banks, and directly accessed using the
switches
1
-
9
.
DIRECT
-A
CCESS-MODE
Changing Banks:
Press and hold
MODE/STORE
until it blinks:
Use switches 1 - 4 to select a bank
when turned off,
REMOTE1
™
stores all current settings automatically . when power is restored, the last settings are again active.
Setting the Gain / Clean Volume
Press and hold the
BOOST
switch for approximately 2 seconds, until it
blinks. Now use the
Level Control
on the
REMOTE1
™
to set the
Gain
(as long as one of the overdrive channels,
VINTAGE
,
CLASSIC
, or
MODERN
is activated), or the
Clean Volume
(as long as the clean
channel is activated). As with the 2nd Master Volume, the Gain can only
be reduced using the
Level Control
knob, with results depending upon
how the Gain and/or Clean Volume contols are set on the
AMP1
™
. It is
therefore recommended to set the
AMP1
™
to maximum gain, and use
the
Level Control
on the
REMOTE1
™
to achieve the required amount
of Gain when storing a preset.
Press and hold FX LOOP
until the switch blinks:
set Loops 1 - 4
The following functions are available when the
Direct-Access-Mode
is active (the Mode/Store switch is lit):
CLEAN
,
VINTAGE
,
CLASSIC
,
MODERN
,
BOOST
,
REVERB
,
FX-LOOP
, adjustable
2nd Master Volume
and
PowerSoak
.
These are additional functions for the
AMP1
™
that are not available without the
REMOTE1
™
.
Using the switches
1
-
4
, you can choose between the four patches,
CLEAN
,
VINTAGE
,
CLASSIC
, and
MODERN
. They can only be used one
at a time because only one of the four channels can be active. Switch
5
(
BOOST
) activates the
AMP1
™
's adjustable Boost. Switch
6
(
REVERB
)
turns the adjustable Hall effect on or off, and Switch
7
activates and deactivates the
FX-LOOP
for the
AMP1
™
. The two extra functions that
are accessed with Switches
8
(
2nd Master Volume
) and 9 (
PowerSoak
), can be adjusted with the
Level Control
knob which is situated
between the two switches.
Setting the 2nd Master
When Switch
8
is activated and lit, the
Level Control
knob next to it
can be used to reduce the 2nd Master Volume as much as 10dB.
The 2nd Master Volume level is automatically stored when Switch
8
is
deactivated, and can be recalled by activating Switch
8
again.
Setting the PowerSoak
Activate the
PowerSoak
with Switch
9
. The Switch is lit. Set the required
reduction with the Level Conrol knob.
1
2
3
4
Setting the Looperkit
Press and hold the
FX-Loop
switch until it blinks. Switches
1
-
4
operate
the loops. Use
Mode/Store
to store.
MASTER
LEVEL
Mode Selection:
Direct Access Mode: switch is unlit
Preset Mode: switch is lit blue
Preset 9
Preset 7
Preset 2
Preset 1
Preset 4
Preset 3
Preset 5
Preset 6
Preset 8
BaNK 2
BaNK 1
BaNK 4
BaNK 3
Preset Mode
Changing Banks
GAIN:
Press and Hold
BOOST
until
the switch blinks:
set the Gain
FX LOOP
LOOP 2
LOOP 1
LOOP 4
LOOP 3
BOOst
Master
VOLuMe
POWer
sO
aK
FX LOOP
ViNt
aGe
CLeaN
MOderN
CLassiC
BOOst
reVerB
direct
access Mode
Progr
am Gain and Looperkit
OPeratiNG
