REMOTE1
™
is the optimal pedal controller (foot operated controller) for the
BluGuitar
®
AMP1
™
. You can comfortably navigate through all the important
AMP1
™
functions by foot as well as accessing all the
additional features. From choosing preset sounds to programming custom sounds, with the
REMOTE1
™
can do it all!
Midi-compatible devices can be connected to the
MIDI Out
connector and the
REMOTE1
™
presets can then be used to select the device's programs. And as if that wasn't enough!
If that wasn‘t enough, with the optional
BluGuitar
®
LOOPERKIT
™
you can integrate external effect pedals into your setup.
In short, with the help of the
REMOTE1
™
, you can turn your
AMP1
™
into a professional, programmable guitar system.
BluGuitar
®
offers all the components - you decide how far you want to go!
FROM "STRAIGhT FORwARD AMP" TO AN INDIVIDUAL GUITAR SySTEM
A lot of new features, intuitive operating, compact and expandable.
Important Safety Notice! Read before connecting!
REMOTE1
™
can only be connected to the
AMP1
™
's
REMOTE
input. Use a stadard 6.3mm
(1/4inch) male to male, mono guitar or speaker cable. This product was manufactured
according to IEC 60065 and left the factory safety tested and ready for operation.
Further safety notices can be found in the
AMP1
™
user's guide.
Troubleshooting:
If the
REMOTE1
™
is not functioning correctly:
•
make sure
AMP1
™
is
not
in
PRESET MODE
(see
AMP1
™
manual page
95
)
•
check the connection cable and replace if necessary
•
disconnect the unit from the
AMP1
™
, then reconnect
•
factory reset: while pressing buttons
1
,
6
and
7
simultaneously, power up the
AMP1
™
.
The
REMOTE1
™
will be reset to the factory default.
Note: this will delete all custom settings
Effect pedals have never been as popular as they are today. Trying to
get excellent sounds and intuitive operating can often only be acheived
using a combination of different, high-quality effect pedals, and as soon
as multiple effects come into play, things start getting complicated and
switching sounds turns into a tapdance.
To solve this problem, so called
Pedal-Switchers
were developed. They
consist of a control center that coordinates and controls multiple effect
loops.
The effect pedals can be added to the different
Pedal-Switchers
loops
singly or combined according to personal preference, your pedals are
Turn your
AMP1
™
into a 4 channel amp with additional functions like
2nd Master
,
PowerSoak
,and programmable
MIDI Out
, that is also
programmable. Whether you use the
REMOTE1
™
as an old school
footboard for stardard function switching, or to choose between
complex presets is totally up to you.
Connect the
REMOTE1
™
to the
REMOTE
-input on the
AMP1
™
using
a standard Mono instrument cable. This cable transfers the control
signal and supplies power to the
REMOTE1
™
. An additional power
supply is unnecessary. When
REMOTE1
™
is connected to
AMP1
™
, two
different modes are available using the
Mode/Store
switch.
Direct-Access-Mode
Direct-Access
offers access to:
Clean
,
Vintage
,
Classic
,
Modern
,
Boost
,
Reverb
,
FX-Loop
,
2nd Master Volume
and
PowerSoak
.
Direct-Access
is active when the
Mode/Store
switch is not lit.
Preset-Mode
When the switch is pressed, it will light up and the
Preset-Mode
is
activated. Here you can save
36 presets
in 4 banks of 9 presets each.
Pressing the
Mode/Store
switch again puts you back in the
Direct-
Access-Mode
.
always turned on. In the switching board itself, loops can be activated or
deactivated. If a loop is activated, the signal is sent through the the loop
and the connected effect pedal(s). When not activated, the signal goes
directly through the
Pedal-Switchers
, by passing the effect pedals not
in use (True-Bypass) to maintain signal strength. This minimizes second-
ary noise and loss of signal.
The
BluGuitar
®
LOOPERKIT
™
expands the
REMOTE1
™
to a pedal
switcher with four True-Bypass-Loops. The combination of active pedals,
and the
AMP1
™
's sound settings can be saved as presets and accessed
by the single press of a switch on the
REMOTE1
™
.
Speaker Out
REMOTE1
™
FX-Loop
PLUG AND PLAy! wITh ThE COMFORTABLE FOOTBOARD FOR ThE AMP1
™
ThE PEDAL-SwITChER MAKES USING FX PEDALS EASy
Speaker Out
REMOTE1
™
1
2
3
4
FX-Loop
Looper Kit
