30
V1.0
SmartBus P900-T32 Series USER MANUAL
8. User will be given an
ENTRY
delay time to disarm the system when enter the protected
premises via
ENTRY/EXIT
zone.
[0] + [1 or 2 or 3 or 4] + [#]
(Press and hold down for 2 seconds)
1. This arming mode is ideal for long away occasion (holiday).
2. In this mode, the system will be
AWAY
armed. Home Automation points will be random
ON/OFF every hour to simulate occupancy from 7pm to 1am.
3. Ensure that all zone indicators are extinguished; if not, check that all protected premises
are closed.
4. Press and hold down key
[0]
for 2 seconds.
5. P1 to P4 options will be displayed.
6. Select the partition number that you wish to arm followed by
[#]
key.
7. The partition number armed
icon will be displayed if it is armed.
8. An
EXIT
delay countdown timer will be shown at the top right temporarily replace the
clock and the keypad audible indicator will sound on and off for the duration of the
EXIT
delay.
9. Any bypassed zones will be shown by the flashing zone underline.
10. Leave the premises only via the
EXIT/ENTRY
zone.
11. User will be given an
ENTRY
delay time to disarm the system when enter the protected
premises via
ENTRY/EXIT
zone.
12. After disarming, Home Automation random ON/OFF function will be deactivated.
[USER CODE] + [#]
1. Enter the premises through a designated
ENTRY/EXIT
zone; entering via other zones will
trigger an alarm instantly.
2. The
ENTRY
delay begins once the
ENTRY
zone is violated.
3. The keypad audible indicator will sound for the duration of the
ENTRY
delay to indicate
that a valid user code is required.
4. An
ENTRY
delay countdown timer will be shown at the top right temporarily replace the
clock.
5. To disarm the system, enter a valid 4-digit
[USER CODE]
followed by
[#]
key before
expiry of the entry delay time.
6. P1 to P4 options will be displayed.
22.7 PARTITION HOLIDAY ARMING
23.0 PARTITION DISARMING