manualshive.com logo in svg

BLUGUARD SmartBus P900-T32 Series, User Manual, Page: 3 / 48

Share
Download
BLUGUARD SmartBus P900-T32 Series User Manual Download Page 3

 

 

3 

V1.0 

SmartBus P900-T32 Series USER MANUAL 

 
 
The 

BLUGUARD 

Control  Panel  is  designed  for  simple  operation  yet  provides  the  maximum 

protection for you. Please read this manual carefully and follow the instructions contained in this 
book.  Fill  in  the  system  information  page  and  store  this  manual  in  a  safe  place  for  future 
reference. 
Your  security  system  consists  of  a  main  control  panel,  one  or  more  keypads  and  home 
automation  (HA)  modules,  various  sensors  and  detectors.  An  enclosure  will  contain  the  control 
panel, which includes the system electronics and standby battery. 
 
 
 
To ensure that your system is functioning, it is important that you test your system weekly. Please 
refer  to  testing  procedures  section  in  this  manual.  If  your  system  does  not  function  properly, 
please  contact  your  system  installer  for  services.  There  is  normally  no  reason  for  anyone  other 
than the installer or service professional to have access to the control panel. 
 
 
 
Even  though  BLUGUARD  is  an  advanced  security  system,  it  does  not  100%  guarantee  the 
protection  against  burglary,  fire  or  other  loses.  Any  alarm  system  whether  commercial  or 
residential is subjected to compromise or failure-to-warn for a variety of reasons. These include: 

 

Intruders  may  gain  access  through  unprotected  openings  or  have  the  technical 
sophistication to bypass an alarm sensor or disconnect an alarm warning device. 

 

Intrusion  detectors,  smoke  detectors  and  many  sensing  devices  will  not operate  without 
power.  Devices  powered  by  AC  will  not  work  if  there  is  no  AC  power  supply  for  any 
reason and the back-up battery is missing, dead or improperly installed. 

 

Alarm  warning  devices  such  as  sirens  may  not  alert  people  or  wake  up  sleepers  if  they 
are located on the other side of closed or partly closed doors.  

 

Telephone line needed to transmit alarm events from the premise to a central monitoring 
station may be out or temporary out of service. Telephone line is subject to compromise 
by sophisticated method of attack. 

 

Smoke  detector  used  in  conjunction  with the  alarm system may  not  sense  fire  that start 
from  where  smoke  cannot  reach  the  detector  such  as  wall,  roof  or  the  other  side  of  the 
doors.  Smoke  detector  also  may  not  sense  a  fire  on  another  level  of  the  residence  or 
building.  In  general,  detectors  may  not  always  warn  you  about  fire  caused  by 
carelessness  and  safety  hazards  like  smoking,  violent  explosions,  escaping  gas, 
improper  storage  of  flammable  material,  overloaded  electrical  circuits,  children  playing 
with matches. 

 

The most common cause of an alarm system not functioning properly when an intrusion 
or  fire  occurs  is  inadequate  maintenance.    Therefore,  your  system  should  be  tested 
weekly to ensure all detectors or sensors are working properly.  

 

Installing an alarm system may make you eligible for lower insurance rates but an alarm 
system  is  not  a  substitute  for  insurance.  Homeowners,  property  owners  and  renters 
should continue to insure their lives and properties. 

 
 
 

 

A readily accessible disconnect device shall be incorporated external to the 
equipment when installation. 

 

No operator’s replaceable batteries provided. 

 

The caution of replacement of battery provided in installation instructions for SERVICE 
PERSON. 

 

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY INCORRECT TYPE. 

 

CAUTION: DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. 

 

The installation instructions require the 

external protective earthing green/yellow wire 

must be at least 0.75mm

2

/18AWG complying with table 3B

. 

 
 
 
 

2.0  TESTING 

3.0  LIMITATIONS 

Note: All information is subject to changes without prior notice

. 

 

3.1  WARNINGS 

1.0  INTRODUCTION 
 

Summary of Contents for SmartBus P900-T32 Series

















































Reviews:

No comments