EN
23
damage to the helmet. This can reduce the
safety function of the helmet, especially in
emergency situations. Replace the helmet if
it has been subjected to severe stress.
• Check before use that the helmet, ear
protectors and visor are undamaged
(cracks, wear). Only use the product if it is
in good condition.
• Never modify the product in any way –
this can put safety at risk.
• Follow all the directions and instructions
for assembly, adjustment and
maintenance of the ear protectors.
• The ear protectors protect the ears and
hearing in noisy conditions. They must
always be used when there is a lot of noise.
• The sealing rings can deteriorate in time.
Check them for cracking and noise
admission after using them.
• Do not clean the ear protectors with
chemicals or other substances that can be
harmful to the user.
• The earmuffs, especially the sealing rings,
can deteriorate in time and should always
be examined at regular intervals to make
sure they are not cracked or admit noise.
• The product is intended to be used as
personal protective equipment and should
be worn at all times when exposed to risk.
• The product is intended to be worn by an
adult and does not provide unlimited
protection from head, face and ear injuries.
• Check that all the parts of the helmet are
suitable for their intended use.
• Do not modify the product.
• The product must only be used to provide
protection from the specified risks.
• The ear protectors also provide a certain
degree of protection from sudden noises,
such as gunfire, but the specified
protective capacity (SNR) is based on the
attenuation of continuous noise and is
not a reliable indication of protection
from sudden noise. Sudden noise, for
example gunfire, can therefore cause
hearing impairment even if these ear
protectors are used. Sudden noise or
SAFETY INSTRUCTIONS
• Read the instructions carefully before use
and save them for future reference. They
contain important information about
safety, use and waste disposal. The
product must only be used for its intended
purpose and in accordance with these
instructions. If you pass this product on to
someone else, give them these
instructions as well.
• The helmet protects the user from head
injuries caused by falling or thrown
objects. It also provides protection from
knocking into stationary objects.
• The ear protectors provide protection from
harmful noise and are only intended to be
used together with BLUEWEAR helmet
004653-57.
• The mesh visor is designed to protect the
user from eye and face injuries caused by
knocks and collisions. It is marked with
several numbers and symbols to indicate
manufacturer, applications, protective
capacity and performance for face
protection.
• Incorrect use or modifications to the
helmet can result in the risk of accidents.
The manufacturer cannot accept liability
for any injuries resulting from improper
use. The product is not intended for
commercial use.
• The first time the helmet is used: check
that all the parts are properly attached
and correctly adjusted.
• Make sure that the helmet is always
correctly in place to ensure proper
protection.
• The helmet does not provide full
protection from injury and does not
replace in any way safe working
procedures.
• Never change or modify the design or
surface finish of the helmet.
• The helmet must not come into contact
with liquids containing alcohol or solvent.
Such substances can damage the plastic.
• Knocks and blows can cause invisible
Summary of Contents for 004508
Page 4: ...1 1 2 3 4 5 6 1 2 3 ...
