15 - Connecting the Speakers
Connecting the Speakers
1. Strip back about 1/2” of the insulation on each of the speaker wires
on both ends.
2. Connect the wire with the white stripe to the red binding post on right
speaker output.
3. Connect the wire with no stripe to the black binding post on the right
speaker output on the back of the amplifier.
4. On the other end of the cable, connect the wire with the white stripe
to the red binding post on the back of the right speaker.
5. Connect the speaker wire with no stripe to the black binding post on
the back of the right speaker.
6. Repeat on the left side.
NOTE: If speaker connections are reversed (black to red and red
to black) the speakers will still produce sound, however, they
will be out of phase and the sound quality will not be optimal.
