Bluetti EP500Pro, User Manual

Page: 12 / 112

4.1 Personnel Requirements
The personnel responsible for the installation and maintenance must first undergo
rigorous training to understand all necessary safety precautions and grasp the
correct method of operation, and can take measures to reduce the danger to
himself or other personnel to be at the lowest limit.
4.2 Anti-static requirements
When installing the sub-panel with the main panel, you must wear an anti-static
gloves or wrist strap which should be appropriately grounded. Do not touch any
bare components directly with your hands.
4.3 Drilling
•
Wear goggles and protective gloves at all times.
•
Shield and protect the unit during drilling to prevent debris from falling into it and
remove all debris after drilling.
•
Drill holes on the unit are forbidden, as this may damage the unit's
electromagnetic shielding performance. The metal shavings may cause short
circuits on the circuit board.
4.4 Installation environment requirements
•
DO NOT block the opening vents or dissipation system when the unit is running to
prevent high temperatures and fires.
•
The unit should be installed in an area away from liquids. It is forbidden to install
near or below water pipes, air outlets, windows and other locations that are prone
to water or liquids entering into the equipment. Failure may result in short circuit.
•
If liquid is found inside the unit, turn it OFF immediately.
12
JUST POWER ON